INOX contains no silicon, acid, kerosene or dieselene.

INOX will not harm metal points or surfaces, plastics, paints,enamels, fibreglass, formica or neoprene seals.

INOX doesn't dry out, gum up, become gooey or sticky

or wash off with water !

INOX is non- conductive, non-static, non-toxic, non-corrosive
          and non-staining.

• INOX-mx3 is available in 6 sizes: 100 & 300 g Aerosol, 125 ml Pump Pack (unpressurized), 5, 20 & 205 litre Containers.
• A 500 ml spray applicator comes with each 5 & 20 litre and 6 applicators with the 205 litre.
• Screw in taps are supplied with each 20 & 205 litre container

LANOX-mx4 Grease is a non-toxic, Food Grade Approved Lanolin grease.
It is made from a pure high technical grade anhydrous lanolin, food grade approved additives and anti-oxidents. It has been especially designed to remain pliable at very low temperatures with the right amount of gripping tackiness (non-fling) to hang on and still have flexibility for the user.

LANOX-mx4 Grease is waterproof, non-conductive and safe to use on all surfaces. It is highly suitable for anti-corrosion, rust proofing and anti-fouling coatings for all metals used in Automotive, Aviation, Commercial, Construction, Earthmoving, Farming, Industrial, Marine, Mining and Transport applications. Waterproofs and protects leather. Preserves timber from water, cracking and dry rot. (Do not use on green timber). Anti-seize for bolts, nuts and threaded rod. Stops electrolysis between dissimilar metals.

LANOX-mx4 Grease is Non-carcinogenic, bio-degradable, highly resistant to salt and acid corrosion, provides lasting protection.

LANOX-mx4 Grease is enviromentally and user friendly.

LANOX-mx4 Grease looks like creamed honey and has no lanolin odour

9509 - 2.5kg tub

INOX-mx6 is a smooth light brown grease made with polyalphaolefins and a special bentone thickener. It contains additives to protect against corrosion and oxidation.

INOX-mx6 grease is recommended for all bearings and general lubrication and where processing temperatures go well below zero, especially in the refrigerated and frozen foods and beverage industries.

INOX-mx6 grease has a temperature range of -30 °C to an extremely high temperature
(HAS NO MELTING POINT).

P T F E - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication to bearings, bushes, shafts, gears, chains, splines, couplings, winches, cables, universals, CV & ball joints.

INOX-mx6 is highly suitable for all BEARINGS, BUSHES, CHAINS, HINGES, SPROCKETS, SLIDES, SPLINES & COUPLINGS, UNIVERSALS AND BALL JOINTS used in all Food processing Machinery, Beverage Filling Lines, Food Conveyor Lines, Food Packaging Equipment, Ovens, Freezers and Cold Rooms.

INOX-mx6 also has a wide spread application outside of the food and beverage industry.
Because of it's Extreme Pressure lubricating ability and NO MELT temperature range, INOX-mx6 is highly suitable for all bearings, bushes, universals, etc used in Bitumen Transporting and Laying Machinery, Foundries, Paint Baking Ovens and all other high temperature applications. INOX-mx6 is also highly suitable for Truck, Trailer and all Farm Machinery wheel bearings, universals & ball joints, splines & couplings, Tierod Ends, Winches and Trailer Couplings.

NB. INOX-mx6 is a premium grade clay based Extreme Pressure grease. Using it with a non-clay based grease can seriously affect its performance. Before using INOX-mx6 grease, it is advisable to remove any other non-clay based greases by flushing or pushing out the old grease with INOX-mx6 in a grease gun.

INOX-mx6 EP Food Machinery Grease is available in 6 sizes:-
30 g Tube, 400 & 450 g Cartridges, 2.5 kg Tubs, 20 & 180 kg Drums

The extreme pressure and anti-wear properties of INOX-mx8 grease gives long service life under high loading and shock loading conditions from very low to very high temperature environments. These special characters of shear stability, combinded with the inclusion of effective rust, oxidation and corrosion inhibitors and tackiness adhesives, ensures this grease to be the preferred recommendation for sealed for life anti-friction bearings.

INOX-mx8 has the ability to prevent scuffing and reduce wear under high load and shock load conditions, together with its excellent high shear stability and high temperature operation, makes INOX-mx8 the preferred choice over other extreme pressure greases.

INOX-mx8 resists 'SQUEEZE OUT' from surfaces requiring lubrication under load conditions.

INOX-mx8 has excellent resistance to water and water wash out even at elevated temperatures. Effective lubrication is maintained and in these situations it also gives protection against rusting and corrosion.

INOX-mx8 will not thin out because it is shear resistant or thicken because it is resists oxidation.

P.T.F.E. - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures to bearings, bushes, shafts, gears, chains, splines, PTO's, turntables, cables, universals, CV and ball joint